SIM
Battery
Push the ribbed tab at the
bottom of the back cover
Lift the cover off
4
Turn the power switch ON.
3
Connect the power cord
and close the back cover.
1
Open the back cover.
2a
Open the back cover.
Insert a SIM-card (cellular model only)
and the backup battery - as illustrated
below.
2b
For PSTN Model:
The Control Panel has 2 standard telepho-
ne sockets, located on the rear end - as
illustrated below.
Connect a telephone cable between the
wall socket and the LINE socket.
You may also connect a telephone device
to the PHONE socket.
5
After completing this process
–
make sure that the Control Panel is
functioning properly, by referring to the
LED indicators (review the indicators
table for reference).
Power Supply and Battery Installation
NOTE:
Make sure that the power switch is in OFF status prior to installation.
The Speakerphone
The Control Panel can also be used as a speakerphone. Answering incoming calls is done
by pressing the EMERGENCY CALL button.
The Speakerphone functions like a standard speakerphone, as long as power is provided
by the external power supply. When operating on backup battery, only emergency calls
are allowed.
Adding a Peripheral
Peripherals can be added to the system by the Pairing process.
1.
To add a peripheral, press the PAIRING button
(right side of the Control Panel) for 5 seconds.
2.
The Control Panel beeps and the ring
around the EMERGENCY CALL button lights up
in Blue, with a circular movement effect.
3.
Power-up the peripheral by inserting its batteries.
NOTE:
The Portable Emergency Button requires no batteries. Simply press its button
for a few seconds.
•
Upon successful pairing
the Blue ring flashes twice and the Control Panel beeps.
•
Upon unsuccessful pairing
the Blue ring changes to Red and flashes twice and the Control
Panel emits a failed beep.
Additional reports sent by the Control Panel:
•
Extreme temperature - Upon detection of extreme temperature on the premises -
the report is issued by zone number and the type of extreme temperature (Low or
High)
•
Inactivity - Upon Activity Timer expiration or no activity detected following a
predefined period.
•
Malfunctions - Upon device or Control Panel malfunction (e.g. low battery, tamper,
power failure, communication problems).
•
Missing reminder - Upon a reminder not cleared by the user.
Care@Home
TM
PERS
Control Panel Quick User Guide
