INSTALLING WITH SCREWS
Care@Home™ Communicator 2.0 User Guide
17
Appendix B
Installing with Screws
You can install the Communicator on a wall with screws.
Prepare the following equipment:
Drill
Two 3 X 35 DIN 7982 C screws and wall anchors – not provided
Philips screwdriver
The mounting-base has two holes. One is the tamper pin, triggering a tamper event if the
Communicator is disturbed.
The rubber seal covering the holes is for waterproofing the Communicator. The seal allows you to
screw through the holes and retain the waterproofing capability.
To install the Communicator using screws:
1.
Remove the back cover of the Communicator.
2.
Mark the drilling spots on the wall by screwing the screws slightly through the wall mount and
tapping them until a mark appears on the wall.
3.
Drill holes where marked and insert the wall anchors.
Hold here and
pull off the back
