Pairing the Pendant
4
Care@Home™ Emergency Pendant Plus User Guide
2.
Pairing the Pendant
You need to pair the pendant with the control panel before the pendant can be used.
To pair a pendant :
1.
Press and hold the
PAIRING
button on the control panel until you hear the double beep.
2.
Press and hold pendant button for 5 seconds.
3.
Ensure that the pairing process is successful. The process can have the following results:
Control Panel Behavior
Meaning
EMERGENCY
button ring blinks blue.
Pairing is successful
Control panel beeps
and
EMERGENCY
button ring
lights up red for 2 seconds.
Pairing is unsuccessful. Try again.
Control panel makes a low pitch beep and
EMERGENCY
button ring lights up blue as
EMERGENCY
button lights up red.
This pendant has already been paired with this
control panel.
Control panel beeps and the
EMERGENCY
button
ring lights up red
Control panel memory is full. No additional devices
can be paired.
PAIRING
Button
