Installing the SK2
Care@Home™ Smoke Detector User Guide
11
7.
Press the
PAIRING
button, located on the right edge of the front of the control panel, for five
seconds.
The control panel beeps and the ring around the
EMERGENCY
button lights up in blue with a
circular movement effect.
8.
Insert the two batteries into the battery compartments, observing the correct polarity.
NOTE:
After you insert both batteries into the SK2, the tamper alarm sounds.
This means the SK2 is working normally and indicates that the batteries are
positioned properly.
9.
Holding the SK2, move at least 2 m (~6 ft. 7 in.) from the control panel.
PAIRING button
