Page 6
CORRECT OPERATION CHECKLIST
CORRECT OPERATION CHECKLIST
1. PROGRAMMING
Access to programming: lift the local telephone handset and dial
.
You will hear the dialling tone (one longer tone followed by a shorter tone).
Program the telephone line type (PSTN or GSM-dedicated): dial
for GSM200 module or
for PSTN line or traditional GSM
interfaces.
Program a telephone number for the emergency-call alarm:
dial
<telephone number>
.
Record the identification message of the specific elevator (max 22
seconds), which is meant to contain all necessary information
concerning the elevator location:
dial
and pronounce the message.
To listen again to the previous message dial:
.
Make an external call to check the telephone line presence:
dial
and digit the telephone number to make a test call.
2. ALARM PROCEDURE CHECK
Press the emergency button for at least 2 seconds (factory default).
The emergency call will be made.
3. ANSWERING AN ALARM AND RESETTING
Answer by the called party.
Press
or wait. The voice message will be heard.
Press
or wait. The hands-free mode will be activated.
Press
to end the alarm.
In case it should not be possible to stop the alarm procedure remotely (i.e. the
entered telephone number is incorrect) simply lift the handset of the local telephone
and dial * <Password> # (by factory default:
.
