Esse-ti Helpy GSM, Быстрое руководство

Страница: 3 / 32

INSTALLING Page 3
LED signalling alarm / periodical test call (yellow)
LED signalling GSM signal strength (green)
LED signalling GSM status (red)
LED signalling power supply status (blue)
Terminal blocks
N. NAME DESCRIPTION
01 +
POWER SUPPLY INPUT (11-14VDC) (1)
02
–
03 AIP GIVEN ALARM INDICATOR LIGHT (output: 12VDC)
04 ARP RECEIVED ALARM INDICATOR LIGHT (output: 12VDC)
05 +12 12VDC OUTPUT (max. 100mA)
06 C COMMON TERMINAL FOR INPUT ALC
(2)
07 – NEGATIVE POLE
08 ALC ALARM INPUT FOR THE ELEVATOR CAR
(3)
09 ALY ALARM INPUT FOR THE PIT (4)
10 IN1 FILTER INPUT
11 ALT2
OUTPUT FOR CONNECTING THE LOUDSPEAKER OF A PASSIVE SPEAKER
UNIT
12 MIC2
INPUT FOR CONNECTING THE MICROPHONE OF A PASSIVE SPEAKER
UNIT OR A SINGLE MICROPHONE
13 MIC3
INPUT FOR CONNECTING THE MICROPHONE OF A PASSIVE SPEAKER
UNIT OR A SINGLE MICROPHONE
14 – NEGATIVE POLE
15 TEL LOCAL TELEPHONE
16 RL1 RELAY
(5)
17 RL1 RELAY
(5)
18 VVX OUTPUT FOR CONNECTING AN ADDITIONAL ACTIVE SPEAKER UNIT
19 VVY OUTPUT FOR CONNECTING THE PIT ACTIVE SPEAKER UNIT
20 ALZ ADDITIONAL ALARM INPUT (4) OR AUXILIARY INPUT (5)
21 AIN GIVEN ALARM INDICATOR LIGHT (output: 0VDC)
22 ARN RECEIVED ALARM INDICATOR LIGHT (output: 0VDC)
23 C-L CAN-BUS
24 C-H CAN-BUS
25 TX RS-232
26 RX RS-232
27 – NEGATIVE POLE
28 C1 COMMON TERMINAL FOR INPUT IN1
(2)
(1) : before using this input disconnect the internal power-supply cable from the A
connector in the picture at page 2
(2)
: can be connected to a block – , to the block +12 or to an external reference
(3)
: allows to connect voltage free contact pushbuttons (NO or NC) or powered
pushbuttons
(4)
: allows to connect voltage free contact pushbuttons (NO)
(5)
: free contact NO