Esse-ti HELPY 2W-V BASIC, Быстрое руководство

Страница: 4 / 32

Page 4 CONNECTING THE SPEAKER UNITS
CONNECTING THE SPEAKER
UNITS
Helpy 2W-V comes with a built-in speaker unit.
It is also possible to connect to the Helpy 2W-V:
-
up to 16 independent 2W speaker units by means of the 2-wire bus (4
units with direct power supply from the bus and 12 with separate power
supply)
- up to 2 passive speaker units (or cables with microphone) combined to the
built-in speaker unit.
Note: a 2W speaker unit allows to realize an independent voice
point with dedicated pushbutton and indicator lights.
Note: a passive speaker unit must be connected to the Helpy 2W-V’s
built-in speaker unit or to another 2W speaker unit and
allows to double it. The passive speaker unit can be installed
at max. 6 m distance from Helpy 2W-V (or from 2W speaker
unit) by using a shielded cable.
Each 2W speaker unit connected over the bus (the built-in speaker unit is
included) must have a unique ID. Speaker units with the same ID can not have
access to the bus and are not working.
Note: the identifier 01 must be assigned to the cabin speaker unit
(default is assigned to the Helpy 2W-V built-in speaker unit).
If the 01 ID is assigned to a 2W speaker unit, the built-in
speaker unit automatically takes the ID 99 (it is possible to
assign a new ID to the built-in speaker unit through the code
73).

Assign, using the DIP switch, an ID to each 2W speaker unit (see next
paragraph).

Connect the speaker units (beware of terminal polarity):
2W SPEAKER UNIT HELPY 2W-V
BUS+ BUS+
BUS
–
BUS
–
PASSIVE SPEAKER UNIT HELPY 2W-V
A ALT2
B MIC2
or MIC3
– –