Esse-ti GSM500 M2M, Руководство пользователя

Страница: 21 / 28

Page 21
S
ETTING THE RELAY ADMINISTRATOR
TELEPHONE NUMBER
It allows to enter the telephone number that can control remotely the relay
through a CLI call (ring).
Upon a incoming call from the relay administrator number, the GSM500
M2M activate / deactivate the relay for 15 seconds (default) or for the
previously set time through the
relay pulse command.
Et-vm1 relayphone x…x
Command : relayphone
Parameter : telephone number without country code
Note: the telephone number must include the country code
only if the GSM500 M2M is not installed in the same
country of the relay administrator.