Esse-ti GSM400 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 56

Esse-ti GSM400 Скачать руководство пользователя страница 55

WARRANTY CONDITIONS

1. In order to claim warranty rights the purchaser must fill out the warranty certificate completely
and enclose proof of purchase.

2. Esse-ti warrants this product under articles 128 and following of the legislative decree n°
206/2005. The warranty term is two years. Six months after the purchase date, the purchaser shall
prove that the defect is attributable to faults existing upon delivery. Defects must be claimed
within two months from identification. The manufacturer shall have the right to refuse free
intervention in case of defects caused by improper use, incorrect installation for user's fault or
external factors. Moreover, the manufacturer shall have the right to refuse assistance if defects are
claimed two months after identification. The technical assistance under warranty shall be
exclusively provided by Esse-ti service centers or by the mother company upon authorization from
Esse-ti service centers.

3. The guarantee exclusively covers defects that cause product malfunctioning. The product under
warranty must have the serial number indicated on the warranty certificate, otherwise the warranty
shall be void. The term "warranty" shall exclusively mean free of charge repair or replacement of
components identified as defective in manufacturing or materials, including workmanship.

4. The warranty shall not apply in case of damages caused by negligence, use or installation not
compliant with instructions, damages caused by interventions of unauthorized personnel, damages
caused by accidental causes and/or user's negligence, with particular reference to external parts.
Moreover, the warranty shall not apply in case of faults caused by connecting the device to
different voltages than indicated or sudden voltage variations in the mains, as well as in case of
damages caused by inductive/electrostatic discharges or discharges due to lightening or other
external phenomena.

5. The warranty shall not apply to parts subject to wear because of use, batteries (if supplied),
connections cables and cords, connectors, external parts and plastic supports free of manufacturing
defects.

6. The warranty does not include compensation of direct and indirect damages caused to
individuals, objects and animals for use, misuse or suspended use during repair.

7. The guarantee shall expire 24 months after the purchase date. After this date, service shall be
provided by charging the cost of replacements and workmanship according to the current rates.

8. The Court of Macerata shall have the exclusive jurisdiction in case of disputes.

«
...
53
54
55
56
»

Содержание GSM400

























































Отзывы:

Нет отзывов