ESS TRG-5, Руководство пользователя, Страница: 20 / 41

14
ess TrG Owner’s Manual
Incoming air pressure regulator
The air pressure regulator controls the amount of pressure sent to the
spray gun. refer to page 6 instructions to determine the correct air
pressure settings.
Turn the external air source. on locate the air inlet regulator (liquid-
filled gauge with a range of 0 to 100 PsI). Pull the adjustment knob’s
black plastic cover to unlock it.
Turn left (counter-clockwise) to decrease pressure.
Turn right (clockwise) to increase pressure.
Push the black plastic cover in to lock the new setting.
Note: For best results, set the pressure from a lower pressure to a high-
er pressure. If the pressure is set too high, adjust the regulator below
the desired pressure then adjust it up to the desired pressure.
To verify that the air pressure regulator functions properly:
1. Connect the air inlet hose to the air source.
2. Make sure that the air pressure regulator is set above 0 PsI
If the air pressure regulator is functioning, the gauge will register
above 0 PsI. If the gauge does not register above 0 PsI, contact ess for
service.
Air pressure regulators
Incoming air pressure regulator
Tank pressure regulator
How do I tell the tank air pressure regulator from the
incoming air pressure regulator?
The tank pressure gauge/regulator
is mounted higher on the frame.
ranges from 0 to 30 PsI
output goes to tank
The incoming air pressure gauge/regulator
ranges from 0 to 100 PsI
output goes to the hose reel hub