background image

19

ess MaxCharge™ spraygun Owner’s Manual 

ESS Warranty

electrostatic spraying systems, Inc. warrants to the original purchaser of any  

electrostatic spraying systems equipment that the equipment shall be free from 

defects in material and workmanship for a period of one year after date of delivery. The 

electrostatic power supply warranty form must be returned for verification of date of 

purchase. 

Disclaimer of Implied Warranties and Consequential Damages 

electrostatic spraying systems’ obligation under this warranty, to the extent allowed 

by law, is in lieu of all warranties, implied or expressed, including implied warranties 

of merchantability and fitness for a particular purpose and any liability for incidental 

and consequential damages with respect to the sale or use of the items warranted. 

such incidental and consequential damages shall include, but not be limited to: trans-

portation, charges other than normal freight charges, cost of installation other than 

cost approved by electrostatic spraying systems, Inc., duty, taxes, charges for normal 

service or adjustments, loss of crops or any other loss of income, expenses due to loss, 

damage, detention or delay in the delivery of equipment or parts resulting from acts 

beyond the control of electrostatic spraying systems, Inc.

THIS WARRANTY SHALL NOT APPLY:

    
  

 
 
 
 

nO eMplOyee Or represenTaTIVe OF  

eleCTrOsTaTIC sprayIng sysTeMs, InC. 

Is auThOrIZeD TO Change ThIs warranTy In any way 

Or granT any OTher  warranTy 

unless suCh Change Is MaDe In wrITIng 

anD Is sIgneD By a COrpOraTe OFFICer OF  

eleCTrOsTaTIC sprayIng sysTeMs, InC.

To vendor items which carry their own warranties such as, but not limited to, en-

gines, air compressors, and liquid pumps. electrostatic spraying systems, Inc. shall 

supply replacement parts at list price pending the warranty investigation of the 

vendor item.  Vendor item parts such as air compressors, liquid pumps, solenoids, 

and other such items must be returned before warranty credit.
If the unit has been subject to misapplication, abuse, misuse, negligence, fire or 

other accident.
If parts not made or supplied by electrostatic spraying systems, Inc. have been 

used in connection of the unit, if, in the sole judgment of electrostatic spraying 

systems, Inc. such parts affect its performance, stability or reliability.
If the unit has been altered or repaired in a manner which, in the sole judgment 

of electrostatic spraying systems, Inc. such alteration or repair affects its perfor-

mance, stability or reliability. This shall include but not be limited to opening of 

the spraygun shell by anyone not authorized by electrostatic spraying systems, 

Inc. to do so.
To normal maintenance, service and replacement items such as, but not lim-

ited to, engine lubricant, filters, or to normal deterioration of such things as, 

but not limited to, belts and exterior finish, due to use and exposure.

1.

2.

3.

4.

5.

62 Morrison st.  ·  watkinsville, georgia 30677-2749  

706-769-0025  · 1-800-213-0518  ·  Fax: 706-760-8072 

email:  [email protected]  ·  www.maxcharge.com

Содержание MaxCharge




























Отзывы: