8
Crown positions:
Position 1 – Normal position.
Crown pushed into case. (Watch runs.)
Position 2 – Position for Quick Change of Big Date.
Rotate crown clockwise. (Watch continues
to run.)
Position 3 – To set TIME: Rotate crown in either
direction. (Watch stops.)
Your ESQ Movado Big Date 3-hand watch features
an oversized date window with two single-digit disks
that rotate independently of one another.
Each day, during the calendar “jump phase” – the
hours between 10:00 pm and 12:00 midnight –
the Big Date will advance automatically. It may be
adjusted manually during these hours; however it
must be set to the following day: the date will not
automatically change at midnight if it has been
manually adjusted during the jump phase.
To set Big Date (Quick Change Mode)
:
1. Pull crown out to position 2. (Watch continues
to run.)
2. Turn crown clockwise until correct digit appears
in each of the two Big Date windows.
3. Push crown back in to position 1, flush
against case.
NOTE: Winding speed should not exceed 5 days/
second during Big Date Setting in Quick Change
Mode. If you turn the crown too rapidly, you may
inadvertently advance past desired date. If this
happens, continue to turn crown clockwise,
advancing through dates past 31 to 01, then
on to correct date.
BIG DATE 3-HAND MODELS
Includes new ESQ Movado Fusion 3-hand models
FIGURE A
2
1
3
