ESPRIT 636, Руководство пользователя

Страница: 12 / 28

9 User’s Manual
3.12 Stay Arming System A
Please refer to section 3.3 on page 5 for an
explanation of stay arming. Press the
[
STAY
/11] key
steadily for 2 seconds. With your system partitioned,
only System A will be Stay armed when the
[
STAY
/11]
key is pressed.
3.13 No Movement Supervision Feature
Your panel can be programmed to send a report and/
or arm the system if it is not armed and there is no
zone activity for a preprogrammed amount of time.
3.14 Automatically Arm on Time
Your installer can program your system to arm at a
specific time each day. In this mode, all protected
zones and detection devices must be in the normal
state before arming can occur.
3.15 Disarming
How do I Disarm the Security System?
1. Enter through the designated entry/exit door.
The keypad will beep and begin the entry delay timer.
2. Enter your Access Code.
The
ARMED
light will go off and the keypad will stop
beeping.
K6X6-EU11.fm Page 9 Tuesday, January 18, 2005 2:12 PM