2
•
Settings
–
basic settings of the sensor
o
Language
–
you can choose the language of the JETIBOX screen.
o
Temperature Alarm
–
you can set a high temperature alarm.
*)
o
Alarm Interval
–
sets the time period between alarm announcement.
•
Service
–
In this menu you can view the device version and reset it to the default factory configuration.
*)
The alarm setting is compatible with Duplex and Hott systems.
JETIBOX Menu Structure
Graupner Hott
Menu Structure
The T125 is recognized by default as a General Air
Module. This can be changed to “EAM” or “Air
-
ESC”
mode through the menu.
Futaba and Multiplex connection
Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is
possible with the following fixed sensor slots:
Futaba S.Bus2
Multiplex MSB
Temperature
1
5
Note
Manual detection in the menu Linkage
–
Sensor.
Choose T125 on slot
1
.
Automatically detected by the transmitter.
S
AFETY INFORMATION
•
Operate the T125 always in dry environment and within the device limits stated in this guide. Never
expose the device to excessive heat or cold.
•
Do not remove the heat shrink tube from the device and do not try to implement any changes or
modifications. This can lead to a total destruction and to the denial of any warranty claims.
•
Always check the polarity of the connection. Never inverse the polarity
–
this could lead to total
destruction.
W
ARRANTY
We grant a warranty of 24 months from the day of purchase under the assumption that they have been
operated in conformity with these instructions at recommended voltages and that they were not damaged
mechanically. Warranty and post warranty service is provided by the manufacturer.
