85
4.
Display functions
English
• To turn the device on, press and hold the “M” button for 1 second.
• To turn it off, press and hold the “M” button for 2 seconds.
• The remaining battery level is displayed on the left hand side of the display.
• The right hand side of the display indicates the assistance levels (PAS) of 9
selectable speeds with the “+” or “-” buttons
.
• To access information relating to speed and kilometres, press and hold the “M” and
“+” buttons for 2 seconds, to select the next entry repeat the combination. To reset
the TRIP entry, press and hold the “M” and “-” buttons for 2 seconds.
• To start the Walk-Assist mode (6 km/h), press and hold the “-” button.
NOTE:
The Walk-Assist function can only be activated when PAS=0.
• Should the bicycle not be used for 5 minutes, the display will turn off automatically.
• To activate the Cruise Control System, identifi ed by the
symbol, briefl y press
the “M” button on reaching the desired speed to maintain with motor assistance.
• To deactivate this function, press the “M” button again.
WARNING:
If the odometer shows a current speed of 0 km/h even when the bicycle
is in motion, check that the magnet on the rear wheel has not moved away from the
speed sensor. If the problem persists, a warning will show on the display; to return to
normal e-bike operation, move the magnet as close as possible to the speed sensor.
Turn the display on the handlebars off and then on again.