Kettle description
1. Base with wire storage
2.
Power O / I
Qy
"0" - kettle off,
"I" - kettle on
e
)) Q e ’ atic lid opening
u ,
User manual of the electric kettle
• Before first use, remove the packaging and take everything from the inside.
• Set the required length of the power cord, put the rest of the cord into the base of the kettle (1).
• The base should be placed on a clean, dry, flat surface.
• Fill the kettle with the required amount of water. If the kettle has been overfilled, there is a risk
that boiling water will overflow while if too little of water kettle may not work properly.
• Water can be poured through the spout or through the open lid, which should be properly
closed after pouring the water.
• The water must reach a minimum and must not exceed the maximum level indicated on the
water level (3).
• Do not pour the water when the kettle is on the base.
• Put the kettle on the base.
• Plug the power plug into a power socket.
• Turn on the kettle by pressing the switch (2).
• When the water is boiling the kettle switches oP automatically.
• Before removing the kettle from the base ensure that the kettle is switched off when it is still
at the position (I) disable it manually.
• Do not use the kettle without water inside.
Cleaning and descaling the kettle
Removable filter is used to stop deposits forming on the heating disc and prevents them from
getting out of the kettle during pouring. This filter should be cleaned regularly under running
water.
