Connecting the PowerBox to
Cameras
Follow these 3 steps and you'll get your PowerBox up and running in no time. By the end, you'll have
your cameras connected and ready to start using.
Step 1. Powering up the PowerBox
Connect the 48V PSU 4 pin connector to the PowerBox connection on the front panel
(fig.1 a)
.
Figure 1.
ESPER PowerBox Front Panel
Step 2. Connecting the DC Couplers to the PowerBox
Take the plug end of the DC Coupler and plug it into 1 of the 6 power outputs (
fig.2 a
) on the rear side
of the PowerBox.
Note:
If your DC Coupler has a connector end (Female connector) rather than a plug end you will
need to use the power extension cables supplied to connect your DC Couplers to the PowerBox
Figure 2.
ESPER PowerBox Rear Panel.
5
Содержание POWERBOX
Страница 1: ...U s e r s M a n u a l...