5
BASIC OPERATIONS
CONNECTION TO A MONITOR
The NVR has a HDMI and VGA output to connect to a monitor . Please select the
appropriate connection and select the correct input channel on the monitor .
POWER ON
Plug the power supply to the DC12V terminal and Switch On from the rear panel .
POWER OFF
Turn off the NVR at the mains power source after selecting the power off option
from the
Shortcut Menu/ Exit System.
LIVE VIEWING
On start up the NVR will display a divided screen . Using the Mouse Control, double
click on any image to bring to full screen . Double click again to return to that main
divided screen .
The recording status and alarm status are indicated by the following icons:
Each channel with a paired camera will also display the signal strength;
Recording
Motion Detect
Time defined recording
Disconnected
Low Signal
Average Signal
High Signal
FHDV4KBWF Manual.indd 5
21/12/2016 13:26:34
