ESP Ecocent 200L, Инструкция по установке и эксплуатации

Страница: 27 / 40

23 of 36 ESP400-10-200L and 300L
f) Vacation Mode: You can set the unit to start up several months from the current date. When you go
on vacation, it allows you to set the unit to run at a preset date and time for your return.
Electric Heater mode and Fan modes are discussed further down.
Please note that the default mode is heating mode. If you are considering using any setting other than Heating,
Eco or Vacation mode, you are strongly advised to take advice from your installer.
To move between the modes, press the mode button repeatedly:
ATTENTION: When you have a vacation, set the unit to vacation mode and set a date for the unit to restart
before your return home so that hot water is available when you get home. Apart for keeping the unit frost free,
during your vacation the Ecocent will not run when set to “vacation mode”.
To check the target temperature, press the up or down button once and the target temperature will be displayed
in the main area of the screen.
To set the target temperature, press the up or down arrows when the unit is running. Once the desired
temperature is shown on the display, press the mode button once to confirm the setting. Pressing the on/off
button before the mode button will cancel the change and the target
temperature will revert to that previously set. Similarly, if, during the procedure, no button is pressed for 10
Secs, changes will be ignored and the unit will return to the previous settings.