Elite Security Products
Unit 7, Target Park, Shawbank Rd
Lakeside, Redditch B98 8YN
Telephone: 01527 515150
Fax: 01527 515143
email: [email protected]
Important notice
The minimum requirements of a PC / Laptop required to provide
accurate reading and re-writing of an SD card used within the
AlertCam is as follows:
CPU
Minimum 1GB
RAM
Minimum 2GB
OS
Windows 2000 / XP / Vista / 7
SD card Must have a capacity of 2GB or higher (maximum 32GB)
Formatting the SD card
It is good practice to Format the SD card using the PC / Laptop you
intend to use for viewing captured images each time any of the
following events occur
After a mains power removal from the AlertCam
After removing the SD card for viewing prior to replacing in the
AlertCam
To format the SD card
Please ensure to save any required images to an alternative folder
prior to formatting.
Place it in the SD / USB adaptor supplied
Place the adaptor in a spare USB port on your PC / Laptop
Right click on the SD card location
Select Format
Ensure the correct file system is selected FAT16 (or FAT) for SD and
FAT32 for SDHC
Select quick format
Following these simple points will ensure correct operation of AlertCam
and should be considered as part of its maintenance schedule.
AlertCam Manual_Layout 5 28/02/2013 16:57 Page 12
