24
Setting mode
1
3
4
2
Changing settings
1
When stopped or during playback, press and
hold the MODE button for 2 or more seconds.
Press for at least
2 seconds.
2
Press the MODE button repeatedly to select the
desired setting item.
Each time you press the MODE button, the item shown on the
display changes as follows.
APS>
3
DPaOFF>
3
DOUT>
3
AOUT>
UPC>
c
DSDF>
c
CLK>
o
Depending on the selected source and operation status,
some items might not appear.
o
If you do nothing for 10 or more seconds, setting mode will
end and ordinary display will resume.
o
When the menu is open, if you press and hold the MODE
button for at least two seconds, or you press the stop (
8
)
button once, setting mode will end and the ordinary display
will reappear.
3
Use the main unit or remote control skip buttons
(
.
/
/
) to change settings.
To change multiple items, repeat steps
2
and
3
.
4
Press and hold the MODE button for 2 or more
seconds to end setting mode.
Press for at least
2 seconds.
Setting mode will also end and the ordinary display will reap-
pear if nothing is done for 10 seconds or the stop (
8
) button is
pressed once.
o
Settings are retained even if the power plug is disconnected.
