Esoteric Esoteric A-80, Руководство пользователя

Страница: 7 / 12

7
ENGLISH
Speaker connection
SIGNAL GND connection
Use a commercially available PVC-covered cord to connect
the signal ground terminal on the unit to the player's signal
ground.
<
Note that this is NOT an electrical safety ground (earth).
AC inlet
Use only the supplied Esoteric power cord. Use of other
power cords may result in fire or electric shock. Unplug the
power cord when you are not going to use the unit for an
extended period of time.
Protection circuits
This unit is equipped with an output short-circuit protection
circuit, an overcurrent protection circuit and a direct current
protection circuit.
The indicator lights in red when the protection circuit is
operating.
< When the indicator blinks slowly, the speaker cable may be
shorted out. Turn off the unit and check your speaker
connections.
< When the indicator blinks rapidly, the internal temperature of
this unit becomes high. Turn off the unit and wait for the
temperature to decrease or place this unit in a well-ventilated
place.
E
D About the speaker terminal
When your speaker cable is bare wire:
Twist the strands of the stripped wires tightly together.
< The thickness of wires should be less than 4 mm (1/8”).
When your speaker cable has spades:
Loosen the terminal cap and insert the spade into the
terminal. Then turn the terminal cap clockwise to tighten it.
<
The inside diameter of spades should be 6 mm or more and
outside diameter of spades should be 13.5 mm or less.
Connection using speaker cables with
banana plugs
Tighten the terminal cap and insert a banana plug.
For European customers
In accordance with European safety regulations, it is not
possible to connect banana plugs into the speaker terminals
on European models.
The holes into which banana plugs are inserted have been
covered with black caps. Connect the speakers using spades
or bare wires.
If the black caps become separated from the terminals, return
them to their original position.
13.5 mm or less
6 mm or more