ESON 696Ui, Руководство пользователя

Страница: 268 / 343

268
Solutions When Using HDMI Link
If you cannot control an HDMI device using the HDMI Link buttons, try the following solutions:
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Make sure the cables meet the HDMI standards.
• Make sure the connected device supports the CEC standards.
• If you connected a new device or changed any connections, you may need to restart the device.
• Connect no more than three devices that support HDMI Link at the same time.
• If you have connected a speaker or receiver, set the output to PCM.
Parent topic: Solving Projector or Remote Control Operation Problems
Solving Interactive Problems
Check the solutions in these sections if you have problems using the interactive system.
Solutions When "Error Occurred in the Easy Interactive Function" Message Appears
Solutions When the Interactive Pens Do Not Work
Solutions When the Interactive Pen Position Is Not Accurate
Solutions When Manual Calibration Does Not Work
Solutions When the Interactive Pens Are Slow or Difficult to Use
Solutions When the Interactive Pens Cause Interference or Unwanted Effects
Solutions When Finger Touch Interactivity Does Not Work
Parent topic: Solving Problems
Solutions When "Error Occurred in the Easy Interactive Function" Message Appears
If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help.
Parent topic: Solving Interactive Problems
Related references
Where to Get Help
Solutions When the Interactive Pens Do Not Work
If the interactive pens do not work, try the following solutions:
• The pens turn off automatically when not in use. Pick up the pen to turn it back on.