PSM 10/12/15 Series Installation manual
Esoltech AB, the battery company
May 1, 2019
20
4.
ESO MODULE
Depending on the system configuration, one or more ESO modules are shipped alongside with
your PSM system. The ESO module is shipped in a cardboard package without pre-assembly.
Each ESO module resembles a rectangular metal box. Please skip to
4.2
if ESO is shipped pre-
assembled.
4.1 ESO assembly
The following instruction applies to the two-ESO system with a nominal power of 12kW.
Lay the two ESO modules side by side on a flat surface. Make sure the second one (ESO2)
have the bottom metal enclosure facing upward as indicated in the picture below.
Note that the weld nuts are visible from the ESO bottom metal enclosure.
Install the ESO adaptor:
