5
1.
Heater – Tank is supplied with 450 watts of heat controlled by an
adjustable, internal thermo-switch. The thermo-switch has been
adjusted to control the bath temperature at 120degrees F when tank
covers are on. If temperature needs to be changed:
o
Disconnect unit from 120Voutlet.
o
Remove back panel.
o
Move control knob of thermostat slightly in clockwise
direction to increase temperature and counter-clockwise to
decrease temperature. Make only slight changes because a
30degree angle change corresponds to an approximate
20degrees F temperature change. Replace top plate on
chamber. Use caution that the bath temperature does not
exceed 180degrees F.
2.
Timer – The unit has been equipped with an Esma digital timer. The
timer is preset at 15 minutes. To change the time simply press the
↑
or
↓
buttons accordingly. Press the Start/Stop button to activate the
timer. Once the timer is running, pressing the Start/Stop button will
stop the ultrasonics. Pressing the Start/Stop button again will
resume the ultrasonics.
3.
Tumbler
•
Timer
position- ON only with timer.
•
Continuous
position- ON with main switch.
