In case of 2-cycle & 4-cycle engine.
4
Blind Nut (4mm)
1
Engine mount (68x105mm)
Linkage Stopper
4
4
12
4
Washer(4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
2
4
Screw (4x25mm)
2
Plastic tube (2x400mm)
Fuel tank (550cc)
1
160 mm
Blind Nut (4mm)
4
6mm
5.2mm
Blind Nut
2.5mm
The front view of the engine installation finished.
The side sketch map of the engine installation finished.
Drill 4 holes and set blind nut in appropriate position in
the firewall before install the engine.
Drill holes to the relevant position in the tailing edge
and epoxy the rudder to them.
Centre line
Centre line
Washer (4x8mm)
Washer (4x8mm)
Washer (4x8mm)
Screw (4x35mm)
Screw (4x25mm)
Nut (4mm)
Spring Washer (4mm)
4mm
Install the engine carefully.
40
39
41
42
43
8
Accessory list for the coming installation steps.
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Set screw (3x4mm)
Washer (2mm)
Set screw (3x4mm)
1
1
1
1
Fuel supply line
Fuel spray line
Air pressure line
Fuel tank (550cc) 1
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x400mm)
Set Screw (2mm)
Washer (2mm)
Linkage Stopper
1
1
1
1
Washer (4x8mm)
4
Set Screw (3x4mm)
Assemle the throttle servo to the fuselage.
Assembly of the fuel tank.
Engine installation finished sketch map.
Mount the fuel tank to the fuselage.
Install the servo.
Assemble the accelerateor push rod to the engine.
45
46
47
48
49
9
44
