2
2
Blind Nut (6mm)
Screw(6x50mm)
Washer (4x12mm)
2
2
Screw (4x75mm)
2
Blind Nut (4mm)
1.5mm
8
TP Screw (2.6x14mm)
14
TP Screw ( 2.3x8mm)
Nut (4mm)
Wheel (110mm)
Note:rubber wheels oleo struts
and retracts are optional.
1.5mm
Two bottom nacelle covers are supplied for optional assembly ,
which is decided by customers.Hardware package is not included.
8
TP Screw (2.6x14mm)
22
TP Screw ( 2.3x8mm)
2
Main wing joiner(30x620mm)
Ply (15x15x3mm)
14
Ply (15x15x3mm)
22
2
Nut (4mm )
2
Wheel (110 mm)
4
PVC part
8
Wood dowel (4x30mm)
1
Rib template (3mm ply)
Bushing (8X4mm)
2
Bushing (8X6mm)
Assemble the rear wheel to the landing gear.
Assemble the landing gear in the side fuselage as below.
Cut off the shaded portion carefully.
Epoxy plies to appropriate position under the nacelle cover
and assemble the nacelle cover to the side fuselage.
Trim the cowling for engine and muffler.
33
34
35
36
37
7
Accessory list for the coming installation steps.
1
PVC part
PVC part
PVC part
1
1
2
Wood dowel (4x30mm)
3mm
130mm
55mm
12
TP Screw (2.3x8mm)
Ply (15x15x3mm)
12
20mm 1.5mm
2
2
Clevis
Copper joiner
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
Steel wire
Copper joiner
Lock Nut (2mm )
Screw (2x10mm)
Ball joint
Washer(2x5mm)
Plastical tube (3x50mm)
2
3mm
Steel wire
Aluminum tube
Clevis
Lock Nut (3mm )
Washer(3x15mm)
Shaft (3x80mm)
Screw (3x15mm)
2
2
2
2
Wooden Block
(15x15x3mm)
Collar (2mm)
Thimble
Install the servo of the rudder.
Assemble the servo for rudder to appropriate
position in the fuselage.
Drill a small hole and epoxy the plastical tube
in it as illustration below.
Drill a small hole to appropriate position in the rudder.
Set the shaft through the hole,fix it and connect
the linkage as illustration.
72
74
71
75
14
73
Accessory list for the coming installation steps.
