8 / 10
3.
Configuration description
Hardware environment setup
The initial configuration requires power supply to the Access Point and direct connection to the local
computer through network cable.
Connection mode
a.
The power adapter
-
> the Access Point power port
b.
The Access Point data port
-
> the computer network port by network cable.
Network environment settings
1.IP address configuration
Default IP address of Access Point
Local IP address:192.168.1.100
Destination IP address:192.168.1.92
The default configuration of the corresponding network card connected to the Access Point is shown in
the figure below, which is set as the default destination IP address.
2.Turn off windows firewall
