ESL 3BS WALL SWITCH
Switch Installation Guide – ESL-KNX-3BS-01WH
PAGE 2 OF 2
Copyright © 2020 ESL Vision, LLC. All rights reserved. Rev: 10/27/2020
You will see the basic controls for
the group. Select INFO on the
bottom right.
Select on ADD NEW DEVICE and
choose SELECT FROM EXISTING
from the drop down.
Your new group is now listed on the
GROUPS page. Select the group.
From the dashboard, select groups.
Select a group or select CREATE
NEW GROUP. Enter the group name
and press enter ()
A list of devices will populate the
list. Check each device you wish to
add and press enter ().
Creating a Group
If the indicator lights on the switch are not illuminated, press the on/off button for 3 seconds until they turn on and are solid.
Please note that the switch is only able to communicate with the app when the indicator lights are on. *If the indicator lights are
blinking when the on/off button has been pressed instead of solid, it needs to be learned in using the previous steps first.
Open the ESL Network Lighting App.
Operating the Switch
The wall switch can be mounted in place of
an existing switch plate, or easily attached to
the wall in a convenient location using the
included double sided foam tape.
TOP BUTTON: Quick clicks will increase the
kelvin incrementally by approximately 400K.
Long press to increase the dimming level.
MIDDLE BUTTON: Quick clicks will decrease
the kelvin incrementally by approximately 400K.
Long press to decrease the dimming level.
BOTTOM BUTTON: Single click on or off.
