Eskan ORBIS 5, Руководство пользователя

Страница: 4 / 12

In the 5...6GHz band the ORBIS 5 has two transmitters which can individually be
configured to jam sub-bands or groups of sub-bands for different types of licence free
and licensed communications. The capability to selectively jam sub-bands can reduce
collateral jamming or improve the range by concentrating the radiated power where it
is required.
Each of the transmitters, 2.4GHz and 2 x 5GHz) can be either independently
controlled from the front panel or linked together for simultaneous operation.
Precise band limits are region dependent. A country selection menu allows rapid
configuration for different regions.
3.1 /
POWER SUPPLY
3.1.1
Internal battery pack
The unit includes a high-capacity Lithium
ion battery pack and built-in intelligent
battery charger.
3.2
Using the mains power supply
The 100- unit is switched off
Note 1: charge times may be longer if
the unit is in use.
Note 2: The battery is protected against
overcharge and over-discharge.
Note 3: Battery life is 2 hours with
continuous transmission on all bands at
maximum power. The actual battery life
depends on the bands enabled and the
transmission power.
3.2.1
When the battery is almost exhausted
a
“Battery Low”
warning will
intermittently flash on the screen.
3.2.2
Connect an external power source to
continue operating without interruption.
The Orbis 5 is designed to disrupt wireless communications in the 2.4...2.5GHz and
5...6GHz bands. Commercial equipment using these bands include wireless LAN,
industrial, medical and radar equipment.
As devices in the 2.4GHz band can mitigate interference by changing frequency, the
ORBIS 5 jams the entire 2.4GHz band continuously with one transmitter.
03/
GETTING STARTED WITH THE ORBIS 5