4
SOLUTION 2
The keyboard platform for Solution 1 is PL003-25 (rectangle) or PL003-25CC
(cut corners). Although the appearance varies, installation procedures are
identical.
PL003-25 PARTS PROVIDED
Keyboard Platform (1)
Palm Rest (1 or 2)
1 for Both Keying
and Mousing
Rectangle (Shown)
or Cut Corners
Flathead Screw (4)
Flange Nut (4)
Cord Clips (2)
Panhead Screw (2)
#8-32x
1
/
2
#8x32
#8-32x
5
/
8
(R-Series: #8-32x
3
/
4)
CAUTION:
Hand-tighten screws only. Do
not
use power tools.
TOOLS REQUIRED
• Phillips screwdriver
STEP 5: Attach Palm Rest(s)
• Attach the palm rest(s) to the keyboard platform. Use the #8-32x
5
/
8
panhead screws (#8-32x
3
/
4
with the R-Series) and a Phillips
screwdriver. Two screw holes are located in the
keyboard platform to accommodate a
variety of installation possibilities.
— With one palm rest, attach it with two
screws through the two end holes.
— With two separate palm rests,
attach each with two screws,
as shown.
— The mouse and keyboard
palm rests may be attached
on either the left or right sides
of the keyboard platform.
Panhead
Screw