Page 2
Motific Components and assembly
Please review these instructions before beginning the installation. Use the illustrations below to check that the all components
needed for assembly were provided with your order. Do not discard the packaging until the product is assembled to your
satisfaction.
CAUTION: Maximum weight capacity on table top is 25 lbs. Do not exceed this maximum weight.
Components
base assembly (1)
round top (1)
– or –
amorphic top (1)
coat hook (1)
wood screw (4)
#10x¾"
assembly clip (1)
Step #1: attach the coat hook with the assembly clip
If the coat hook and clip are already installed, proceed to step 2.
• Place the coat hook in position on the table support, as shown below left.
• Install the assembly clip to hold the hook in place while the work surface is installed, as shown below right.
1
coat hook
table support
assembly clip
