AUDIOTRAK MAYA44 MKII User Manual
- 19 -
2.
INPUT
P
ANEL
l
MIC,
LINE
1/2
Selecting either line input or microphone input for input 1/2. When selected,
lights blue.
l
MIC P12V
By selecting this button, the +12 volt phantom power will be applied to input 1/2
for condenser microphone.
(
Warning
:
Make sure this button is not lit so the phantom power will not applied
to dynamic microphone. Appling the phantom power to dynamic microphone will
damage the microphone.)
l
MON
Selecting this button enables monitoring from the selected source.
l
ANA, DIG
When optional MI/ODI/O add-on card is connected, you can switch between analog
and digital input for input 3/4. Otherwise, it stays on analog.
(
NOTE:
When monitoring digital input through input 3/4, the digital signal comes
through DAC resulting the wave out is not mixed together.)
l
FADER
Display and change the input level for each source. The level can be set using the
mouse, mouse wheel, or cursor keys. The top level is +12dB(400%) and you have to
adjust it accordingly. The suggested reference level is between -3dB and -6dB.
Click the dB indicator to mute and un-mute.
