MaXiO System
Manual
41
6.3 Cakewalk SONAR
There are few steps to configure SONAR, which supports either WDM or ASIO drivers. After
launching SONAR, go to
Options > Audio
.
If you prefer the
WDM/KS mode, change the settings as
shown in the following picture:
Note that the input and output drivers have to match each other. Restart SONAR after the settings
have changed.
If you prefer the ASIO mode (which is supported in SONAR 2.2 and newer), first, change the
Driver Mode
to
ASIO
on the
Advanced
tab of as shown below. Then restart SONAR. Note that we
recommend using ASIO instead of WDM/KS as the performance will be better.
Содержание MaXiO 032
Страница 22: ...MaXiO System Manual 22...
Страница 23: ...MaXiO System Manual 23...