3
LAPTOP TRAY INSTALLATION
If the EDGE Monitor Arm Currently Has a Monitor Attached:
Remove the Monitor
• Disconnect the monitor cables.
• If a VESA locking screw is installed, remove the screw.
• Press down on the plastic tab on the VESA mount to release the VESA plate.
• Lift the monitor and VESA plate from the VESA mount.
Remove the VESA Plate from the Monitor
• Place the monitor face down
• Remove the four screws that
attach the VESA plate to the
monitor.
• Remove the VESA plate.
Proceed to "Attach the VESA Plate to the Laptop Tray" on page 4.
Remove
VESA
Locking
Screw
1.
2.
VESA
Plate
Screw
VESA Plate
Monitor
(Face Down)
Upw
ard