5
ADJUSTMENT
LIFT-WB
Test Operation
• Place the monitor and other equipment that will be used with this
product on the top platform and keyboard platform.
• Depress the paddle lever. Raise and lower the unit through its full range of
movement.
• Position the unit so the support beam is at a 45° angle. If necessary, make
product.
45°
If Necessary, Adjust for Load Weight
This adjustment can be used to maximize ease of operation. When operating this product, the platform
should move easily to any position and hold that position.
•
•
–).
• Use the 6mm Allen key to turn the adjusting screw — counterclockwise to increase load, clockwise to
decrease it.
• Test operation and re-adjust as necessary.
CAUTION:
Do not overtighten the MAX (+) adjustment.
6mm Allen Key
