6
LEDG2
STEP 6: Manage the Power Supply Cords and/or Jumper Cords
• Adhere cord clips to the underside of
the cabinet and other surfaces as
needed to organize the cords neatly.
IMPORTANT SAFETY PRECAUTIONS
Read all safety precautions and installation instructions carefully before installing
or servicing this fixture. Failure to comply with these instructions could result in
potentially fatal electric shock and/or property damage.
If wiring is required, it is recommended that a qualified electrician perform all wiring.
This fixture must be wired in accordance with all national and local electrical codes.
Do not handle any energized fixture or attempt to energize any fixture with wet
hands or while standing on a wet or damp surface or in water.
Make sure the power source conforms to the requirements of the fixture.
Protect the power cord from coming into contact with sharp objects, oil, grease,
hot surfaces, or chemicals. Replace or repair damaged or worn cords immediately.
This fixture is intended for general indoor lighting only.
Cord Clip
Cord