IVX 128 Plus upgrade guide
2
8.
Start Esi-Access again and connect to the IVX 128 being upgraded.
9.
Once the connection is established, click on the
Maintenance
item on the Esi-Access menu bar.
Click on
Send
, then click
Software/Prompts
. The
Software/Prompts
window will appear (Figure 1).
10.
In the
Software
area of the window, select the 128_1108.bin file you copied in Step 6. Select the
slot (2 or 3) into which you will load the software.
Note:
If you’re unsure of which slot to use, click on the
Versions
button at the lower right of the
Esi-Access window. The contents of each slot will be displayed. Select an empty slot or, if
both slots are occupied, select the slot with the oldest (lowest number) version.
11.
In the
Run At
field, select Power Cycle. Next, enter the
Version
number (1.10.8). (Refer to Figure 1.)
Figure 1
12.
Click on the
Send
button. Click on
Yes
in the confirmation window. Esi-Access will now send the
IVX 128 conversion program.
13.
When the software load has completed, power down the cabinet and power it up again.
Wait for
the phone displays to come back on
(about 4–6 minutes) before continuing to the next step.
14.
In the
Software
area of the window, select the second .bin (128_2nnn.bin) file you copied in
step 6. Select the same slot as in step 10 into which to load the software.
15.
In the
Version
area, enter the new version number (such as 2.11.nn).
Example:
If the second .bin file is named 128_2117.bin, enter 2 in the first box, 11 in the second
box and 7 in the third box.
16.
In the
Prompts
area of the window, under
Prompt Type
, click on
Custom Prompts.
You will see the
prompt files you copied in step 7. Select
all
of these prompt files and click on the
Add
button. This
will copy all of the selected prompts to the
Prompts to Send
list.
17.
Click on the
Send
button. Then click on
Yes
to confirm. Esi-Access will now send the IVX 128 Plus
program and prompts.
18.
When Esi-Access displays the “Transfer complete” message, close Esi-Access and proceed to the
Hardware Installation
section on page 5.