ESI FlexCharge FCHHUB-ES Series, Руководство по установке

Страница: 4 / 8

FlexCharge Hub Installation
Step #1: remove the rear cover
• The rear cover on Model FCHHUB-ES slides off the charging pad.
• The rear cover on Models FCHHUB-K1 and FCHHUB-K2 snaps off the charging pad.
Installation of the FlexCharge Hub is quick and easy. No disassembly of the monitor arm is required. Simply follow the steps below.
Step #2: Model FCHHUB-ES only: if necessary, remove the front cover and install a different one
• Refer to the illustrations at right. If the correct cover for your monitor arm assembly
is already on the charging pad, proceed to Step #3.
• If not, remove the front cover and install the correct one.
Edge/Evolve Sena (single)
Sena2 (dual) SenaEX (pole)
Edge/Evolve/Sena Sena2 SenaEX
remove
incorrect
cover
install
correct
cover
remove
incorrect
cover
install
correct
cover
Model FCHHUB-K2
Model FCHHUB-ES
rear cover rear cover