ESI Feature Phone Скачать руководство пользователя страница 25

Страница: 25 / 102

User’s Guide

Voice mail operation

D.4

Message retrieval

Message(s) waiting display

If you have at least one

new

message, the

VOICE MAIL

key will blink (on a 24- or 48-Key Feature Phone)

and your display will show the number of new and old messages in your mailbox.

On an ESI Cordless Handset, an “envelope” icon on the display also appears when you have at least one
new message.

Note:

Message status information (shown in the example above as

NEW 3 OLD 1)

appears on a 24-Key or

48-Key Feature Phone only when new messages exist.

Retrieving voice mail messages from your ESI Feature Phone

Press

VOICE MAIL

Enter your password if required (you may change the requirement for a password in user programming

menu 5; see "Password,” page C.5).

The ESI phone system will start playback of messages with the oldest new message and continue until

all messages are played. The display will show the origination of the message, the countdown duration
of the message, whether new or old, and the time/date of when the message was left.

Cordless
Handset or
24-Key
Feature Phone

48-Key
Feature Phone
(also shows
running playback
time in reverse)

At the end of each message, the ESI phone system prompts you for instructions (see the chart, “Keys’

functions during voice mail message retrieval,”

next page)

. Once you’ve learned these prompts, you

can proceed more rapidly by pressing one of the appropriate keys any time during a message or during
a prompt.

exit

playback of messages, simply hang up your phone.

Note:

If you hang up

during

playback of a message, the system saves that message as new

and

all

others not deleted.

A 12-Key Feature Phone will display only the date and time.

Содержание Feature Phone







































































































Результаты поиска

Содержание Feature Phone

Отзывы:

ESI Feature Phone, Руководство пользователя, Страница: 25 / 102

Результаты поиска

Содержание Feature Phone

Отзывы: