ESI ESRTPRF, Руководство пользователя и инструкция по установке, Страница: 36 / 36

Commissioning/ Configuring
1. If the receiver and thermostat have been supplied as a
kit, the units have already been paired in the factory and
no pairing is needed.
2. Power up the receiver and press M/A (Manual/Auto)
button ① (Fig.5, page 25) for approximately 10 seconds
until the MANUAL light ② (Fig.5, page 25) begins to
flash.
3. On the programmer, press and hold “SET” and then
“DAY” until the green light of receiver stops blinking (after
approximately after 10 seconds).
4. When the light on the receiver stops flashing the two
Version 3.1
ESi Controls Limited
sales@esicontrols.co.uk
www.esicontrols.co.uk