ESI ESRTP4RF, Инструкция пользователя, Страница: 13 / 20

13
Pre-Set Temperatures: 7 Day
In 7 day setting, the pre-set settings are the same as the 5/2
Day programme.
Pre-Set Temperatures: 24 Hours
In 24hr setting, the pre-set settings are the same as Mon-Fri
of the 5/2 Day programme.
3.2
Setting the Operation Mode (5/2 day, 7 day, 24hr)
1. Switch the slider to PROG .
2.
Press +/–
buttons to move between 7 day, 5/2 day or
24hr operation.
5/2 Day operation is shown by MO, TU, WE, TH, FR
flashing (5 Day) and then SA, SU flashing (2 Day)
7 Day operation
is shown by just one day flashing at
a time
24 hr operation is shown by MO, TU, WE, TH, FR, SA, SU
flashing at the same time.
3. Wait 15 seconds to automatically confirm and return
to Run mode or press
Next
to move to ‘Setting the
Programme’.
3.3
Setting the Program
1. Choose between 5/2 day, 7 day or 24 hr operation
(see
above steps 1-2)
.
2. Press the Next button. The time will flash and P1 will
be displayed (the 1st temperature event).
3. Press
+/–
to set the time (10 minutes increments). Press
the
Next
button and the temperature will flash.
4. Press +/– to set the temperature (increments of 0.5°c).
Press the Next button to go to the next time
temperature event (e.g. P2).