5
CLIMB1 ASSEMBLY
Attach VESA Mount to Writing Platform Column
• Loosen the knobs on each side of the VESA
mount to allow the mount to fit over the writing
platform column.
• With the open slots on top, slide the VESA mount
over the column and position at the desired
height. Tighten the knobs.
— The height of the VESA mount may be
adjusted at any time by loosening the knobs.
Attach VESA Screws to Monitor
• Place the monitor face down on a flat surface.
• Use the 3mm Allen key to attach M4x12 VESA screws into
the top two holes only.
— Do not tighten the screws all they way. Leave ¼"
exposed for attachment to the VESA mount.
Tighten
Knobs
Loosen
Knobs
Open
Slots
on Top
VESA Mount
M4x12
VESA
Screw
¼" Exposed
Monitor
(Face Down)
Top Two
Holes Only
