4
ASSEMBLY
VICTORY-LX 3 LEG ELECTRIC TABLE BASE
STEP 6
Attach the cross outer channels to the outer leg
columns with four M6x18 socket head screws per leg.
• Use a 5mm Allen key.
STEP 7
Attach the other end of the cross channels to the
center leg brackets with two M6x15 socket cap
•
Adjust the cross channels so that their two end
brackets (see illustration).
•
Use a 5mm Allen key to secure the screws.
STEP 8
Attach the feet to the outer leg columns.
• Place the square opening on the foot over the leg.
•
• The shorter side of the foot should be positioned to
the rear of the table.
Use the 5mm Allen key and M6x15 socket head
M6x18
Round Point
5mm
Allen Key
Outer
Cross Channels
90°
120°
M6x15
M6x15
Rear
Front
Outer
Cross Channel
Foot
Longer
Side
Shorter
Side
• Place the guides into the cross channels.
• Place the guides into the cross channels.
•
cross channel.
Guides
