3
E-CMT MONITOR ARM ADAPTER
Assemble the E-CMT Base
• Remove the clamp assembly from the Edge or Evolve base. Use a 4mm
Allen key to remove the three screws securing the assembly.
• Attach the E-CMT rail mount bracket to the monitor arm base with the three
screws previously removed. As before, use the 4mm Allen key.
• Peel the backing from the adhesive side of the
Teflon guide and adhere the guide to the bottom
of the assembled E-CMT base.
Attach Base Assembly to Rail
• Insert the flathead socket screws
into the two holes on top of the
rail mount bracket.
• Attach the square head nuts at to
the tips of the screws only.
IMPORTANT:
The flat surface of the
nuts must be facing up, toward
the screw head. If not, they will not
lock into the rail.
Remove
Clamp
Assembly
Attach
Rail Mount
Bracket
Peel and
Adhere
