Art. No. 11151
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH, ESERA-Automation 2020
www.esera.de
11151 V2.0 R1.0 Manual
Page 1 of 8
User Guide
1-Wire Multisensor Pro I for
Temperature, Humidity and Air quality
Professional temperature-and humidity-
sensor for home, schools, commercial
buildings and businesses
Precise temperature- and humidity-sensor
with 12Bit resolution
Universal on-wall mounting
Stylish and high quality sensor housing
Connection via screw terminals
Easy voltage supply
Application
:
Temperature sensor for heating system
(individual/single
Monitoring of living spaces
for mould and mildew hazard rooms)
Ventilation system control
Monitoring of living areas for risks of mold
1
Introduction
Before you start assembling the 1-Wire Multisensor Pro I and before you take the device into operation, please
read this assembly and operating instruction carefully to the end, especially the section referring to the safety
notes.
2
Product description
With the 1-Wire Multisensor Pro I you have acquired a professional and highly accurate multi-sensor. Due to
the new technology of the ESERA 1-Wire Pro sensors, the accuracy of humidity measurements is on
average 200
– 300 % higher compared to most standard sensors on the market. In addition, the evaluation
of the delivered measured values is enormously simplified.
The 1-Wire Multisensor Pro enables simple climate monitoring of all rooms and buildings.
The air quality sensor can be used to give a statement on the current air quality and a note on ventilation.
The air quality of the living area is additionally indicated by an LED "traffic light" (green, yellow and red) on
the sensor. The humidity sensor provides information on the humidity conditions in the living area and can be
used to prevent the formation of mould.
An accurate temperature sensor is an important actual value transmitter for all types of radiator and heating
controls.
In combination with 1-Wire ESERA switching modules / binary outputs, a very effective and energy-saving
heating control (individual room control) is possible.
The 1-Wire Multisensor Pro I is intended for use in normal living rooms. For outdoor use and in damp rooms,
such as saunas, steam baths or conservatories, a suitable sensor is available from the ESERA website.
The Multisensor is housed in an attractive surface-mounted housing and blends harmoniously into modern
living and business rooms.
