background image

All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of 
ESERA GmbH. Errors and technical modification subject to change. 



ESERA GmbH, ESERA-Automation 2020 

www.esera.de 

11162 V2.0 R1.0  Manual 

Page 2 von 5 

 
 

Technical data 

Input and output:  

 1 x RJ45 sockets connected in parallel (12VDC, 5VDC, GND and Data) on Push In 
terminal X4 

Output: 

7 x push-in terminal (5VDC, GND, 1-Wire Data Primary (forward) and 1-Wire Data 
Secondary (return) 

Termination: 

A passive bus termination with 4.7kOhm is provided at Push In terminal X7 
Use the secondary terminal of the Push In terminal X4 

Operating voltage: 

5VDC 

Operating current: 

RJ45 socket max. 1.5A, push-in terminals max. 3A 

Protection circuits: 

Reverse polarity protection for 5V input/output 

Temperature,operation:  -20°C to +60°C  
Air humitidy: 

 

10 - 92% (non condensing) 

Dimensions:  

 

Housing 112x41x 35 (LxWxH)  

Protection class: 

III 

Housing protection type: IP00 
 

Conformity 

EN 50090-2-2 
EN 61000-4-2, ESD 
EN 61000-4-3, HF 
EN 61000-4-4, Burst 
EN 61000-4-5, Surge 
EN 61000-6-1, interference immunity 
EN 61000-6-3, interference radiation 
RoHS 
 

Connection diagram 

The Push In terminals X1 - X3 and X5 - X7 are intended for linear topology (network cabling) of 1-Wire sensors. 
The RJ45 modular jack (X8) and the Push In terminal X4 are connected in parallel.   
The input signal can be fed to the Push In terminal X4 or the RJ45 modular connector X8. 
It is also possible to use terminal X4 and the modular connector (X8) as an adapter from network cable to single 
cable. A passive bus termination with 4.7kOhm is provided at Push In terminal X7 
Use the secondary terminal of the Push In terminal X4. 
 

 

Содержание 11162






Отзывы: