All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH, ESERA-Automation 2020
www.esera.de
11140 V2.0 R1.0 Manual
Page 2 of 5
3
Technical data
Function:
Push In terminal and all RJ45 sockets are connected in parallel.
Output:
6 x RJ45 sockets connected in parallel (5V, 12V, GND and Data)
Input:
Push In Terminal (12V, 5V, GND and Data)
Topology:
tree or star topology (all RJ45 sockets are connected in parallel)
Operating voltage:
5 VDC and 12VDC
Current max.:
max. 500mA
Protection circuits:
Overvoltage protection (5V line), ESD and reverse polarity protection
Temperature,Operation: -20°C to +60°C
Air humitidy:
10 - 92% (non condensing)
Dimensions:
Housing 112x41x 35 (LxWxH)
Protection class:
III
Housing protect.class:
IP 00
4
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, interference immunity
EN 61000-6-3, Interference radiation
RoHS
5
Wiring diagram
The connection diagram is available as a separate
document on the ESERA website in the article
download section.
5.1 1-Wire Network Connection (Input/Output)
The Push In terminal (X7, screwless terminal) and the
RJ45 modular socket (X8) are connected in parallel.
This allows the input signal to be added via one of the
two connectors. It is also possible to use the two
connectors (X7 and X8) as adapters from network
cables to single cables.
The 12V connection is only provided between the two
connectors X7 and X8.
5.2 Assignment RJ45 socket (input/output)
The Push In terminal and the RJ45 socket are connected in parallel, which means that both connections can be
used equally.
Sockets Assignment:
1
GND
2
+5V
3
GND
4
1-Wire Data
5
GND
6
unassigned
7
+12V
8
GND
6
1-Wire Network
Basics and tips for the 1-Wire bus system can be found on the ESERA website at
https://www.esera.de/1-wire-grundlagen/
