ESENE SayHi 320 Seris, Руководство пользователя

Страница: 14 / 90

www.escene.cn/en/
Escene Communication
14
--4) Press ‘ #’ button
（
default) ,
-or press ;
-or wait 5s (default), then it send
the number automatically.
speakerphone or Programmable buttons
Place a call using a
headset
Put on your headset and active
Headset button, and then do as
using speakerphone
Redial --Press REDIAL button to dial the last number
-or press Navigation button-Right > “Dialed number”, select a
number, and press
Dial from a call log --1) Press MENU or OK button
>
“Call history”, you can select
“Missed calls”, “Received calls” and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select
“Missed calls” ( down ), “Received calls” ( left ) and “Dialed
numbers” ( right ) )
；
--2) Then press button .
Place a call while
Another call is active
--1) Press Hold button or soft key ;
--2) Press again the line one or the other line , you can enter another
number;
--3) Press ‘
#’ button (default) ;
-or press to send the number.
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing
, Headset or Speaker button.
• If you make a mistake while dialing, press C button to erase digits.
Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are
available on SayHi IP Phone .
If you want to... Then...
Answer with a
handset
--1) Your phone ring;
--2)
Line button of the ringing
line is Red and flashing,
Light strip is Red
and flashing
；
--Pick up the handset
Answer with the
speakerphone
(Non-headset
--Press Speaker button
-or press the flashing Line button,