ES/WS620-PEGv4
IP DeskPhone Quick User Guide
Table 1
Light-strip
LED Status
Description
Red, flashing
There is an incoming call.
Red, steady
Hook-off. enter a usual conversation
Yellow-green, flashing
Holding call.
Yellow-green, steady
Active call.
Table 2
Programmable Buttons
LED Status
Description
Red, steady
Remote line is busy. (BLF enable)
Yellow-green, steady
Remote line is idle. (BLF enable)
Dark
BLF disable.
Table 3
Others in RED
Buttons
Description
Headset, Mute, Speaker
The corresponding function is enabled.
1-1
PC port to PC, LAN port access outside the network, EXT Socket
Extension units, Upper right to power, the right of access RJ9
headset, the lower right of access a handset.
If WIFI network and wired network are both working, the network
will using wired first.
The USB port in the phone of left side, only support DC 5V power
offer.
Steps: Press the menu button on the phone
MENU-> System
setting->Advanced setting->
Enter
Advanced Password
(Empty
by default) by pressing
OK -> Network -> LAN Port
click
OK
TYPE has the following options :
STATIC
、
PPPOE
、
DHCP
Choose
STATIC
press Navigation key - to the next, see the IP
address settings, the IP and gateway settings and other related
network information, including
"."
Use the key
"*"
entry.
Select
PPPoE
username and password to register.
Select
DHCP
needn’t to setting IP.
* I
f there is wireless AP in surrounding environment, you can choose the
System setting -> Network -> Wi-Fi setting -> Hotspot list
, choose
a hotspot input the password (no password is not set);
Manual Input
Hotspot: Wi-Fi setting -> Hotspot list -> Manual Input Hotspot,
Input hotspot name , password and select the encryption type. After
setting, press Submit can make it work.
On the phone, press
MENU
button -
> System Setting ->
Advanced Setting -> type Advanced password
(it is idle by
default) and press
OK button -> SIP Accounts ->Account 1
，
and
then set the parameter as follow:
Enable Account:
Select Enable,
2-2
Username
：
Type your SIP account,
User Pwd
：
Type your SIP password,
SIP1
：
Type the IP address of your SIP server (you can type
“.”
by
“*”
button
，
you must confirm the connection between the phone and SIP
server)
，
And then select Submit changes
，
and press OK button to
submit the changes.
You can pick up the handset or press
Headset/Speaker
button to place
a call.
Dial directly:
Dial number directly, then press # button or Send
soft-key (it will call from the first available line);
Redial:
Press
Redial
button/soft-key to dial the latest number;
Dial from Call history:
Press
Menu
button, select “Call history” and
select one of “Missed calls”, “Received calls” and “Dialed numbers”
lists to dial by pressing
Dial
soft-key.
You can open Call history in standby status of phone by pressing
corresponding Navigation-buttons, for example ,
Left
button : “Received
Calls” list ;
Right
button : “Dialed Numbers” list ;
Down
button : “Missed
Calls” list .
UP
button :"tone volume" ;
"OK"
button to confirm the key ;
next to the
"C"
key for the Cancel button.
*This document introduces normal function operation of IP phones
only. For details (operation and configuration), refer to User Manual.
And set details on the web page of phone. In the browser, enter the IP
phone's address, enter the phone's user name and password (the
default are root), enter the IP phone's web configuration interface.
-----------------------------------------------------------------------------------------------
Address: Floor 4 Building C YueAn Industrial Park No.51 Huangcun Road Tianhe
District Guangzhou China
Postal Code: 510665
E-mail: [email protected]
2-3
